2 × 2 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 2 × 2 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 6–8 mm (0.236–0.315 in). The shaft keyway is 1.2 mm (0.047 in) deep and the hub keyway 1 mm (0.039 in) deep.

dShaft diameter (over – up to)
6–8 mm0.236–0.315 in0.236–0.315 in6–8 mm
bWidth
2 mm0.079 in0.079 in2 mm
t1Shaft keyway depth
1.2 mm0.047 in0.047 in1.2 mm
t2Hub keyway depth
1 mm0.039 in0.039 in1 mm

Drawing

b 2 mmb 0.079 int1 1.2 mmt1 0.047 int2 1 mmt2 0.039 in⌀7 mm⌀0.276 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

2 × 2 specifications

dShaft diameter (over – up to)6–8 mm0.236–0.315 in
bWidth2 mm0.079 in
hHeight2 mm0.079 in
t1Shaft keyway depth1.2 mm0.047 in
t2Hub keyway depth1 mm0.039 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.