3 × 3 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 3 × 3 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 8–10 mm (0.315–0.394 in). The shaft keyway is 1.8 mm (0.071 in) deep and the hub keyway 1.4 mm (0.055 in) deep.

dShaft diameter (over – up to)
8–10 mm0.315–0.394 in0.315–0.394 in8–10 mm
bWidth
3 mm0.118 in0.118 in3 mm
t1Shaft keyway depth
1.8 mm0.071 in0.071 in1.8 mm
t2Hub keyway depth
1.4 mm0.055 in0.055 in1.4 mm

Drawing

b 3 mmb 0.118 int1 1.8 mmt1 0.071 int2 1.4 mmt2 0.055 in⌀9 mm⌀0.354 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

3 × 3 specifications

dShaft diameter (over – up to)8–10 mm0.315–0.394 in
bWidth3 mm0.118 in
hHeight3 mm0.118 in
t1Shaft keyway depth1.8 mm0.071 in
t2Hub keyway depth1.4 mm0.055 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.