1-1/2" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 1-1/2" square key (ANSI B17.1) is used on shafts over 5-1/2 in up to 6-1/2 in. The keyseat is cut 0.75 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
139.7–165.1 mm5.500–6.500 in5.500–6.500 in139.7–165.1 mm
bWidth
38.1 mm1 1/2 in1 1/2 in38.1 mm
t1Shaft keyway depth
19.05 mm3/4 in3/4 in19.05 mm
t2Hub keyway depth
19.05 mm3/4 in3/4 in19.05 mm

Drawing

b 38.1 mmb 1 1/2 int1 19.05 mmt1 3/4 int2 19.05 mmt2 3/4 in⌀152.4 mm⌀6 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

1-1/2" square specifications

dShaft diameter (over – up to)139.7–165.1 mm5.500–6.500 in
bWidth38.1 mm1 1/2 in
hHeight38.1 mm1 1/2 in
t1Shaft keyway depth19.05 mm3/4 in
t2Hub keyway depth19.05 mm3/4 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.