3/32" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 3/32" square key (ANSI B17.1) is used on shafts over 5/16 in up to 7/16 in. The keyseat is cut 0.0469 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
7.94–11.11 mm0.313–0.438 in0.313–0.438 in7.94–11.11 mm
bWidth
2.38 mm3/32 in3/32 in2.38 mm
t1Shaft keyway depth
1.19 mm3/64 in3/64 in1.19 mm
t2Hub keyway depth
1.19 mm3/64 in3/64 in1.19 mm

Drawing

b 2.38 mmb 3/32 int1 1.19 mmt1 3/64 int2 1.19 mmt2 3/64 in⌀9.53 mm⌀3/8 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

3/32" square specifications

dShaft diameter (over – up to)7.94–11.11 mm0.313–0.438 in
bWidth2.38 mm3/32 in
hHeight2.38 mm3/32 in
t1Shaft keyway depth1.19 mm3/64 in
t2Hub keyway depth1.19 mm3/64 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.