1/8" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 1/8" square key (ANSI B17.1) is used on shafts over 7/16 in up to 9/16 in. The keyseat is cut 0.0625 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
11.11–14.29 mm0.438–0.563 in0.438–0.563 in11.11–14.29 mm
bWidth
3.18 mm1/8 in1/8 in3.18 mm
t1Shaft keyway depth
1.59 mm1/16 in1/16 in1.59 mm
t2Hub keyway depth
1.59 mm1/16 in1/16 in1.59 mm

Drawing

b 3.18 mmb 1/8 int1 1.59 mmt1 1/16 int2 1.59 mmt2 1/16 in⌀12.7 mm⌀1/2 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

1/8" square specifications

dShaft diameter (over – up to)11.11–14.29 mm0.438–0.563 in
bWidth3.18 mm1/8 in
hHeight3.18 mm1/8 in
t1Shaft keyway depth1.59 mm1/16 in
t2Hub keyway depth1.59 mm1/16 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.