Parking Space Dimensions: US, ADA, UK, Germany, Korea, Japan
Minimum and typical parking space sizes by country, including accessible spaces. A typical US stall is 8.5–9 × 18 ft; an ADA car space is 96 in (8 ft) wide plus a 60-in access aisle, a van space 132 in plus 60 in.
Size chartTap a size for its drawing and full specs
| Space | WStall widthmmftmm · ft | LStall lengthmmftmm · ft | AAccess aisle / transfer zonemmftmm · ft | Basis |
|---|---|---|---|---|
| United States (typical ranges) | ||||
| US standard stall (typical) | 2591–27438.5–9 | 5,48618 | — | Typical (local zoning decides) |
| US compact stall (typical) | 2286–24387.5–8 | 4,572–4,87715–16 | — | Typical (local zoning decides) |
| United Kingdom | ||||
| UK standard bay | 24007.87 | 4,80015.75 | — | Recommended size |
| Germany (M-GarVO) | ||||
| Germany, open both sides | 23007.55 | 5,00016.4 | — | Regulatory minimum |
| Germany, bounded one side | 24007.87 | 5,00016.4 | — | Regulatory minimum |
| Germany, bounded both sides | 25008.2 | 5,00016.4 | — | Regulatory minimum |
| Korea (주차장법 시행규칙) | ||||
| Korea 일반형 (standard) | 25008.2 | 5,00016.4 | — | Regulatory minimum |
| Korea 확장형 (extended) | 26008.53 | 5,20017.06 | — | Regulatory minimum |
| Korea 경형 (compact) | 20006.56 | 3,60011.81 | — | Regulatory minimum |
| Korea parallel, standard | 20006.56 | 6,00019.69 | — | Regulatory minimum |
| Korea parallel, compact | 17005.58 | 4,50014.76 | — | Regulatory minimum |
| Korea motorcycle | 10003.28 | 2,3007.55 | — | Regulatory minimum |
| Japan (MLIT guideline) | ||||
| Japan kei car | 20006.56 | 3,60011.81 | — | Design guideline |
| Japan small car | 23007.55 | 5,00016.4 | — | Design guideline |
| Japan standard car | 25008.2 | 6,00019.69 | — | Design guideline |
| Japan small truck | 30009.84 | 7,70025.26 | — | Design guideline |
| Japan large truck or bus | 330010.83 | 13,00042.65 | — | Design guideline |
| Accessible spaces (ADA, UK, DE, KR, JP) | ||||
| ADA accessible car space | 24388 | — | 15245 | Regulatory minimum |
| ADA van-accessible space | 335311 | — | 15245 | Regulatory minimum |
| ADA van space, 8 ft + 8 ft aisle | 24388 | — | 24388 | Regulatory minimum |
| UK disabled bay | 24007.87 | 4,80015.75 | 12003.94 | Recommended size |
| Germany, wheelchair users | 350011.48 | 5,00016.4 | — | Regulatory minimum |
| Korea 장애인전용 (accessible) | 330010.83 | 5,00016.4 | — | Regulatory minimum |
| Japan wheelchair users | 350011.48 | — | — | Regulatory minimum |
No exact match. The nearest sizes:
What the numbers mean
Width is measured to the centre of the stripes; length is the stall depth for 90° parking. The driving aisle comes on top: about 24 ft (7.3 m) for two-way 90° parking in the US.
In the US the stall size is set by local zoning, so the chart gives the usual range (ULI / ITE practice). ADA sets only accessible spaces: 96 in wide with a 60-in aisle beside it, or 132 in for vans (96 in is allowed if the aisle is 96 in). Two spaces may share one aisle.
Korea widened its minimum stall in 2019: standard 2.3 → 2.5 m wide, extended 2.5 × 5.1 → 2.6 × 5.2 m. German widths depend on what bounds the stall: 2.30 m open, 2.40 m with a wall or column on one side, 2.50 m between walls.
About Parking Space Sizes
Cars have grown: a full-size pickup is about 2.0 m wide without mirrors and 5.9 m long, which is why many older 2.3-m stalls feel tight. If the layout allows, 2.5–2.7 m (8.5–9 ft) width is comfortable for doors to open.
Garages need more than a striped stall because walls stop doors: in Germany the 2.50 m figure applies between walls; for a single private garage, 3.0 × 6.0 m is a common plan size.
Accessible spaces must be on the shortest accessible route to the entrance and level (max. 1:48 slope in any direction under ADA). Van-accessible spaces need 98 in vertical clearance along the route.
UK disabled bays keep the 2.4 × 4.8 m bay and add 1.2-m hatched zones along one side and the rear, for an overall footprint of 3.6 × 6.0 m.
Number of accessible spaces (ADA §208.2)
For each parking facility; one in six accessible spaces (at least one) must be van-accessible.
| Total spaces | Accessible spaces required |
|---|---|
| 1–25 | 1 |
| 26–50 | 2 |
| 51–75 | 3 |
| 76–100 | 4 |
| 101–150 | 5 |
| 151–200 | 6 |
| 201–300 | 7 |
| 301–400 | 8 |
| 401–500 | 9 |
| 501–1000 | 2 % of total |
| 1001 and over | 20 + 1 per 100 over 1000 |
Questions
What is the standard size of a parking space in the US?
Usually 8.5 to 9 ft wide and 18 ft long (2.6–2.7 × 5.5 m). Local zoning sets the exact minimum; compact stalls are about 7.5–8 × 15–16 ft.
How wide is an ADA handicap parking space?
96 in (8 ft) plus a 60-in (5 ft) access aisle. Van-accessible: 132 in plus a 60-in aisle, or 96 in with a 96-in aisle.
What size is a UK parking bay?
2.4 × 4.8 m is the usual standard. Disabled bays add 1.2-m zones at the side and rear: 3.6 × 6.0 m overall.
What is the parking space size in Korea?
Standard (일반형) 2.5 × 5.0 m and extended (확장형) 2.6 × 5.2 m since 2019; compact 2.0 × 3.6 m; accessible 3.3 × 5.0 m; parallel 2.0 × 6.0 m.
How wide should a garage parking space be in Germany?
At least 2.50 m when both sides are bounded by walls (M-GarVO), 5.0 m long. Wheelchair users need 3.50 m.
Sources
- 2010 ADA Standards for Accessible Design §502 (parking spaces) and §208 (number of spaces)
- Urban Land Institute / ITE: Dimensions of Parking (typical stall and module dimensions)
- BS 8300-1:2018, Design of an accessible and inclusive built environment; DfT Traffic Advisory Leaflet 5/95 Parking for disabled people
- Muster-Garagen- und Stellplatzverordnung (M-GarVO), §4 Einstellplätze
- 주차장법 시행규칙 제3조 (주차장의 주차구획): 국가법령정보센터
- 国土交通省 駐車場設計・施工指針 表2・4・1 駐車ますの大きさ
- 高齢者、障害者等の移動等の円滑化の促進に関する法律施行令 第18条 (車椅子使用者用駐車施設 幅350 cm以上)
- Bayerische Garagen- und Stellplatzverordnung (GaStellV) §4: Einstellplätze
- Wikipedia: Parking space (US widths, UK 2.4 × 4.8 m)
- Durham NC Unified Development Ordinance 10.4.2 (24 ft aisle for 90° parking)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.