NPS 20 Butt-Weld Fitting Dimensions
Butt-Weld Fittings
For NPS 20 butt-weld fittings (pipe OD 20.000 in / 508.0 mm): a 90° long-radius elbow is 30.00 in (762.0 mm) centre to end, a 45° elbow 12.50 in (317.5 mm), and a straight tee 15.00 in (381.0 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.
- A90° elbow, long radius (centre to end)
- 762.0 mm30.00 in30.00 in762.0 mm
- B45° elbow, long radius (centre to end)
- 317.5 mm12.50 in12.50 in317.5 mm
- CTee, centre to end of run
- 381.0 mm15.00 in15.00 in381.0 mm
- HReducer, end to end
- 508.0 mm20.00 in20.00 in508.0 mm
Drawing
NPS 20 specifications
| DN (metric nominal) | 500 |
|---|---|
| ODPipe outside diameter | 20.000 in508.0 mm |
| A90° elbow, long radius (centre to end) | 30.00 in762.0 mm |
| A90° elbow, short radius (centre to end) | 20.00 in508.0 mm |
| B45° elbow, long radius (centre to end) | 12.50 in317.5 mm |
| CTee, centre to end of run | 15.00 in381.0 mm |
| MTee, centre to end of outlet | 15.00 in381.0 mm |
| HReducer, end to end | 20.00 in508.0 mm |
| ECap length (standard wall) | 9.00 in228.6 mm |
| E₁Cap length (heavy wall) | 10.00 in254.0 mm |
Pipe of this size
Flanges of this size
All Butt-Weld Fittings sizes
Sources
- ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
- ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
- pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
- Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
- pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.