10" Class 150 Flange Dimensions

Pipe Flanges · ASME B16.5 Class 150

A 10" Class 150 flange (ASME B16.5 Class 150) has a 406.4 mm (16.00 in) outside diameter and 12 × 7/8" bolts on a 362 mm (14.25 in) bolt circle, in 25.4 mm (1 in) holes. These mating dimensions are the same for every flange type of this size and rating: weld neck, slip-on, threaded, socket weld and blind.

DFlange outside diameter
406.4 mm16.00 in16.00 in406.4 mm
KBolt circle diameter
362 mm14.25 in14.25 in362 mm
nNumber of bolts
12
Bolt size
7/8"

Drawing

⌀406.4 mm⌀16.00 in12 × ⌀25.4 mm⌀1 inBC ⌀362 mm⌀14.25 in
28.5 mm1.12 in⌀406.4 mm⌀16.00 in⌀323.9 mm⌀12.75 in
Section shows the flange ring only; hub and neck depend on the flange type.Drawn to scale · Dimensions in mmDimensions in inches

10" Class 150 specifications

DN (metric nominal)250
DFlange outside diameter406.4 mm16.00 in
KBolt circle diameter362 mm14.25 in
nNumber of bolts12
Bolt size7/8"
LBolt hole diameter25.4 mm1 in
tfFlange thickness (min., excl. raised face)28.5 mm1.12 in
RFRaised face diameter323.9 mm12.75 in
ODPipe outside diameter273.1 mm10.750 in

Same nominal size in other ratings

All Pipe Flanges sizes

Compare all 117 flanges in the Pipe Flanges chart →

Sources

  1. ASME B16.5-2020: Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard
  2. EN 1092-1:2018, Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
  3. Project Materials: Class 150 / 300 / 600 flange dimension charts (ASME B16.5)
  4. pipedata.org: Weld neck flange dimensions, ASME B16.5 (inch and mm)
  5. RoyMech: BS EN 1092-1 PN16 flange dimensions and bolting
  6. piping-world.com: Dimensions of EN 1092-1 PN16 weld neck flanges
  7. Texas Flange: ANSI B16.5 Class 600 forged flange dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.