2" Class 300 Flange Dimensions

Pipe Flanges · ASME B16.5 Class 300

A 2" Class 300 flange (ASME B16.5 Class 300) has a 165.1 mm (6.50 in) outside diameter and 8 × 5/8" bolts on a 127 mm (5.00 in) bolt circle, in 19 mm (3/4 in) holes. These mating dimensions are the same for every flange type of this size and rating: weld neck, slip-on, threaded, socket weld and blind.

DFlange outside diameter
165.1 mm6.50 in6.50 in165.1 mm
KBolt circle diameter
127 mm5.00 in5.00 in127 mm
nNumber of bolts
8
Bolt size
5/8"

Drawing

⌀165.1 mm⌀6.50 in8 × ⌀19 mm⌀3/4 inBC ⌀127 mm⌀5.00 in
20.8 mm0.82 in⌀165.1 mm⌀6.50 in⌀92 mm⌀3.62 in
Section shows the flange ring only; hub and neck depend on the flange type.Drawn to scale · Dimensions in mmDimensions in inches

2" Class 300 specifications

DN (metric nominal)50
DFlange outside diameter165.1 mm6.50 in
KBolt circle diameter127 mm5.00 in
nNumber of bolts8
Bolt size5/8"
LBolt hole diameter19 mm3/4 in
tfFlange thickness (min., excl. raised face)20.8 mm0.82 in
RFRaised face diameter92 mm3.62 in
ODPipe outside diameter60.3 mm2.375 in

Unlike Class 150 (4 bolts), 2" Class 300 has 8 bolts, the quickest way to tell the two apart on site.

Same nominal size in other ratings

All Pipe Flanges sizes

Compare all 117 flanges in the Pipe Flanges chart →

Sources

  1. ASME B16.5-2020: Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard
  2. EN 1092-1:2018, Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
  3. Project Materials: Class 150 / 300 / 600 flange dimension charts (ASME B16.5)
  4. pipedata.org: Weld neck flange dimensions, ASME B16.5 (inch and mm)
  5. RoyMech: BS EN 1092-1 PN16 flange dimensions and bolting
  6. piping-world.com: Dimensions of EN 1092-1 PN16 weld neck flanges
  7. Texas Flange: ANSI B16.5 Class 600 forged flange dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.