4" Class 600 Flange Dimensions

Pipe Flanges · ASME B16.5 Class 600

A 4" Class 600 flange (ASME B16.5 Class 600) has a 273.1 mm (10.75 in) outside diameter and 8 × 7/8" bolts on a 215.9 mm (8.50 in) bolt circle, in 25.4 mm (1 in) holes. These mating dimensions are the same for every flange type of this size and rating: weld neck, slip-on, threaded, socket weld and blind.

DFlange outside diameter
273.1 mm10.75 in10.75 in273.1 mm
KBolt circle diameter
215.9 mm8.50 in8.50 in215.9 mm
nNumber of bolts
8
Bolt size
7/8"

Drawing

⌀273.1 mm⌀10.75 in8 × ⌀25.4 mm⌀1 inBC ⌀215.9 mm⌀8.50 in
38.1 mm1.50 in⌀273.1 mm⌀10.75 in⌀157.2 mm⌀6.19 in
Section shows the flange ring only; hub and neck depend on the flange type.Drawn to scale · Dimensions in mmDimensions in inches

4" Class 600 specifications

DN (metric nominal)100
DFlange outside diameter273.1 mm10.75 in
KBolt circle diameter215.9 mm8.50 in
nNumber of bolts8
Bolt size7/8"
LBolt hole diameter25.4 mm1 in
tfFlange thickness (min., excl. raised face)38.1 mm1.50 in
RFRaised face diameter157.2 mm6.19 in
ODPipe outside diameter114.3 mm4.500 in

From NPS 4 up, Class 600 flanges are larger than Class 300 in OD and bolt circle; up to NPS 3 the drilling is identical to Class 300 and only the thickness (and the 1/4" raised face) differs.

Same nominal size in other ratings

All Pipe Flanges sizes

Compare all 117 flanges in the Pipe Flanges chart →

Sources

  1. ASME B16.5-2020: Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard
  2. EN 1092-1:2018, Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
  3. Project Materials: Class 150 / 300 / 600 flange dimension charts (ASME B16.5)
  4. pipedata.org: Weld neck flange dimensions, ASME B16.5 (inch and mm)
  5. RoyMech: BS EN 1092-1 PN16 flange dimensions and bolting
  6. piping-world.com: Dimensions of EN 1092-1 PN16 weld neck flanges
  7. Texas Flange: ANSI B16.5 Class 600 forged flange dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.