DN65 PN10 Flange Dimensions
Pipe Flanges · EN 1092-1 PN10
A DN65 PN10 flange (EN 1092-1 PN10) has a 185 mm (7.28 in) outside diameter and 8 × M16 bolts on a 145 mm (5.71 in) bolt circle, in 18 mm (0.71 in) holes. These mating dimensions are the same for every flange type of this size and rating: weld neck, slip-on, threaded, socket weld and blind.
- DFlange outside diameter
- 185 mm7.28 in7.28 in185 mm
- KBolt circle diameter
- 145 mm5.71 in5.71 in145 mm
- nNumber of bolts
- 8
- Bolt size
- M16
Drawing
DN65 PN10 specifications
| DN (metric nominal) | 65 |
|---|---|
| DFlange outside diameter | 185 mm7.28 in |
| KBolt circle diameter | 145 mm5.71 in |
| nNumber of bolts | 8 |
| Bolt size | M16 |
| LBolt hole diameter | 18 mm0.71 in |
| ODPipe outside diameter | 76.1 mm2.996 in |
EN 1092-1 specifies 8 holes for steel DN65 PN10/PN16 flanges. 4-hole versions (the old DIN 2501 drilling) are allowed for cast iron and copper alloy flanges and for steel only by agreement. Check the mating valve before ordering.
Same nominal size in other ratings
All Pipe Flanges sizes
Sources
- ASME B16.5-2020: Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard
- EN 1092-1:2018, Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges
- Project Materials: Class 150 / 300 / 600 flange dimension charts (ASME B16.5)
- pipedata.org: Weld neck flange dimensions, ASME B16.5 (inch and mm)
- RoyMech: BS EN 1092-1 PN16 flange dimensions and bolting
- piping-world.com: Dimensions of EN 1092-1 PN16 weld neck flanges
- Texas Flange: ANSI B16.5 Class 600 forged flange dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.