NPS 10 Pipe Dimensions (DN 250)

Pipe Sizes

NPS 10 (DN 250) steel pipe has an outside diameter of 10.750 in (273.1 mm) in every schedule. In Schedule 40 the wall is 0.365 in (9.27 mm), giving an inside diameter of 10.020 in (254.51 mm); in Schedule 80 the wall is 0.594 in (15.09 mm) and the ID 9.562 in (242.87 mm).

ODOutside diameter
273.1 mm10.750 in10.750 in273.1 mm
IDInside diameter, SCH 40
254.51 mm10.020 in10.020 in254.51 mm
tWall, SCH 40
9.27 mm0.365 in0.365 in9.27 mm
Weight, SCH 40
60.30 kg/m40.52 lb/ft40.52 lb/ft60.30 kg/m

Drawing

⌀273.1 mm⌀10.750 in⌀254.5 mm⌀10.020 int = 9.27 mmt = 0.365 inSection shown: SCH 40
Wall by schedule (enlarged)5S3.40 mm0.134 in10S4.19 mm0.165 in409.27 mm0.365 in8015.09 mm0.594 in16028.58 mm1.125 inXXS25.40 mm1.000 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 10 specifications

DN (metric nominal)250
ODOutside diameter10.750 in273.1 mm
tWall, SCH 5S0.134 in3.40 mm
tWall, SCH 10S0.165 in4.19 mm
tWall, SCH 400.365 in9.27 mm
tWall, STD0.365 in9.27 mm
tWall, SCH 800.594 in15.09 mm
tWall, XS (extra strong)0.500 in12.70 mm
tWall, SCH 1601.125 in28.58 mm
tWall, XXS1.000 in25.40 mm
IDInside diameter, SCH 5S10.482 in266.24 mm
IDInside diameter, SCH 10S10.420 in264.67 mm
IDInside diameter, SCH 4010.020 in254.51 mm
IDInside diameter, SCH 809.562 in242.87 mm
IDInside diameter, SCH 1608.500 in215.90 mm
IDInside diameter, XXS8.750 in222.25 mm
Weight, SCH 4040.52 lb/ft60.30 kg/m
Weight, SCH 8064.49 lb/ft95.97 kg/m

Also known as

DN25010"250A

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.