G 4 BSP Thread Dimensions

Pipe Threads · BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc

G 4 BSP (BSP: British pipe thread, ISO 228 G / ISO 7 R, Rp, Rc) has 2.309 mm (11 TPI) and an outside diameter of about 113.030 mm (4.450 in). Thread form: G parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal, 55° flank angle. Engagement length 25.4 mm (1.000 in).

nThreads per inch
2.309 mm11 TPI11 TPI2.309 mm
DOutside diameter (pipe OD / major Ø)
113.030 mm4.450 in4.450 in113.030 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
25.4 mm1.000 in1.000 in25.4 mm

Drawing

gauge planeL₁ 25.4 mmL₁ 1.000 in⌀113.030 mm⌀4.450 inG: parallel · R: taper 1:16
55°P = 2.309 mmP = 11 TPIRounded crests and roots (Whitworth)
BSP: 55° Whitworth thread. G is parallel; R (external) and Rc (internal) taper 1:16 with the gauge length L₁ shown.Proportions shown, not to scale · Dimensions in mmDimensions in inches

G 4 BSP specifications

nThreads per inch11 TPI2.309 mm
DOutside diameter (pipe OD / major Ø)113.030 mm4.450 in
d₁Minor diameter110.073 mm4.334 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)25.4 mm1.000 in
Thread angle55°
FormG parallel (ISO 228) or R/Rc tapered 1:16 (ISO 7); Rp parallel internal

Also known as

G4R4Rp4Rc4

NPT thread of the same nominal size (not interchangeable)

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.