Type I Plug: Dimensions, Rating and Where It Is Used

Plug Types

Type I (AS/NZS 3112; GB 1002/GB 2099 (China); IRAM 2073 (Argentina)) has 3 pins and is rated 10 A at 250 V. Sockets of this type also accept: I. Main countries: Australia, New Zealand, China, Argentina, Pacific islands.

Pins
3
Rated current
10 A
Rated voltage
250 V

Drawing

Pin face (looking at the pins)
Pins as seen looking into the plug face. Earth pin position approximate; body outline schematic.Drawn to scale · Dimensions in mmDimensions in inches

Type I specifications

Pins3
EarthedYes
Rated voltage250 V
Rated current10 A
Pin shapeFlat blades
StandardAS/NZS 3112; GB 1002/GB 2099 (China); IRAM 2073 (Argentina)
Socket also acceptsI
Main countriesAustralia, New Zealand, China, Argentina, Pacific islands

Argentina's IRAM 2073 plug has the same shape but live and neutral are reversed compared with Australia. Chinese Type I plugs are dimensionally interchangeable for most purposes. A 15 A Australian plug has a wider earth pin and fits only 15 A sockets.

All plug types

All 15 plug types A–O →

Sources

  1. IEC: World Plugs (plug and socket types A–O by country)
  2. IEC TR 60083: Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
  3. BS 1363-1: 13 A plugs, socket-outlets, adaptors and connection units
  4. NEMA WD 6: Wiring Devices, Dimensional Specifications
  5. Museum of Plugs and Sockets (plugsocketmuseum.nl): dimension tables for national standards
  6. WorldStandards: Plug and socket types

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.