Plug Types A to O: World Plug and Socket Chart

The IEC labels the world's domestic mains plugs with the letters A to O. The letter tells you the shape of the plug, not the voltage. A plug that fits is not automatically safe to use. The most useful single fact: the two-pin Type C Europlug fits more sockets than any other plug (C, E, F, H, J, K, L, N and O).

15 plug typesChecked 2026-11-156 sources
All fifteen IEC plug types, pins facing you. Tap a plug for its dimensions.Drawn to scale

Plug typesTap a type for its drawing and dimensions

15 of 15 types
TypeEarthedPinsdPin diameter (L, N)mminsPin spacing (L–N centres)mminRated currentARated voltageVSocket also accepts
Type ANo2—12.70.50015125A
Type BYes3—12.70.50015125A, B
Type CNo240.157190.7482.5250C
Type DYes35.10.20119.10.7525250D
Type EYes24.80.189190.74816250C, E, F
Type FYes24.80.189190.74816250C, E, F
Type GYes3—22.20.87413250G
Type HYes34.50.177—16250C, H
Type IYes3——10250I
Type JYes340.157190.74810250C, J
Type KYes34.80.189190.74816250C, K
Type LYes340.157190.74810–16250C, L
Type MYes37.10.28025.41.00015–16250M
Type NYes340.157190.74810–20250C, N
Type OYes34.80.189190.74816250C, O

How to identify a plug type

Look at three things: the pin shape (flat blades, round pins or rectangular pins), the number of pins (two or three) and the pattern they make. Flat parallel blades are A or B; flat blades in a V are I; rectangular pins in a triangle are G; three round pins in a line are L.

Round two-pin plugs are the confusing family. Thin 4.0 mm pins with no earth contact are C (Europlug). Thicker 4.8 mm pins with two metal earth clips on the sides are F (Schuko); the same pins with a hole for the socket's earth pin are E. Most moulded plugs sold in Europe today are the CEE 7/7 hybrid, which has both the clips and the hole and fits E and F sockets alike.

Three round pins in a triangle are D or M (thick pins, Indian and South African), or J, N and O (thin pins, Swiss, Brazilian and Thai). These differ only in where the earth pin sits, measured from the line through the other two: 5 mm for J, 3 mm for N and 11.9 mm for O.

The Socket also accepts column lists every plug that physically goes into a socket of that type. Fitting is not the same as compatible: check the voltage on your device label before plugging in.

About Plug Types

The letters A to O were introduced by the US Department of Commerce in the 1990s and are now maintained by the IEC on its World Plugs site. They describe what a plug looks like; each letter stands for one or more national standards: Type F is the German Schuko (CEE 7/4), Type G is British BS 1363, Type I is Australian AS/NZS 3112 and also the Chinese GB 1002/2099 plug.

There are really two plug "worlds". North and Central America, Japan and Taiwan use flat-blade A and B plugs on 100–127 V. Almost everywhere else uses 220–240 V with round or rectangular pins. IEC 60906-1 was meant to unify the 230 V world with one plug; only Brazil (Type N, NBR 14136) and South Africa (SANS 164-2) adopted it.

For travellers the practical rule is simple: carry a Europlug (Type C) lead or a universal adapter for 230 V countries, and check that chargers and laptop bricks are marked 100–240 V ~ 50/60 Hz. Those work everywhere with only a plug adapter. Hair dryers, kettles and other heaters usually are not dual-voltage and need a voltage converter, or buy a local appliance.

Pin dimensions on this page are nominal values from the national standards. Earth-pin positions that the standard summaries do not give numerically are drawn proportionally but not dimensioned, and are marked as approximate under the drawing.

Earthed and unearthed

Types A and C have no earth. They are for double-insulated appliances (marked ⧈) such as phone chargers, shavers and most small electronics. Types E and F are earthed through the socket even though they have only two pins: E through a pin on the socket that enters a hole in the plug, F through two spring clips at the edge of the recess.

Ratings

The rated current is that of the plug-and-socket system, not of the circuit. A Europlug is limited to 2.5 A; a UK BS 1363 plug carries its own fuse (3 A or 13 A) because UK ring circuits are protected at 32 A. Type L, M and N exist in a lower and a higher current version with different pin sizes; a 16 A Italian plug does not fit a 10 A socket.

Questions

What plug type is used in Europe?

Mostly Type C (two-pin Europlug) and Type F (Schuko), with Type E in France, Belgium, Poland, Czechia and Slovakia. The UK, Ireland, Malta and Cyprus use Type G. Switzerland uses J, Italy L and Denmark K. All of these also accept the Type C Europlug.

What is the difference between Type C and Type F?

Type C (Europlug) has two 4.0 mm pins and no earth, rated 2.5 A. Type F (Schuko) has two 4.8 mm pins and two earth clips, rated 16 A. Both have pins 19 mm apart. A C plug fits an F socket; an F plug does not fit a C-only socket.

Are Type E and Type F compatible?

Through the CEE 7/7 hybrid plug, yes: it has both the side clips for F sockets and the hole for the E socket's earth pin, and it is the plug fitted to nearly all European appliances. A pure CEE 7/4 Schuko plug does not fit an E socket.

Which plug type is used in the most countries?

Type C. It is listed for well over 100 countries and its own sockets and the sockets that accept it (E, F, H, J, K, L, N, O) cover almost all of Europe, Africa, South America and much of Asia.

Does a plug adapter change the voltage?

No. An adapter only changes the pin shape. If your device is marked 100–240 V it works everywhere with an adapter. A 120 V-only device on 230 V needs a step-down converter; a 230 V device on 120 V will run weakly or not at all.

What is the spacing between pins on a European plug?

19 mm between pin centres for C, E, F, J, K, N and O. Pin diameter is 4.0 mm on Type C, J and N (10 A) and 4.8 mm on E, F, K and O.

Sources

  1. IEC: World Plugs (plug and socket types A–O by country)
  2. IEC TR 60083: Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
  3. BS 1363-1: 13 A plugs, socket-outlets, adaptors and connection units
  4. NEMA WD 6: Wiring Devices, Dimensional Specifications
  5. Museum of Plugs and Sockets (plugsocketmuseum.nl): dimension tables for national standards
  6. WorldStandards: Plug and socket types

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.