Ø20 Rebar Size, Area and Weight

Rebar Sizes · Metric bars, EN 10080 / ISO 6935-2

Ø20 reinforcing bar (Metric bars, EN 10080 / ISO 6935-2) has a nominal diameter of 20 mm (0.787 in), a nominal cross-section of 314 mm² (0.487 in²) and weighs 2.470 kg/m (1.660 lb/ft).

dNominal diameter
20 mm0.787 in0.787 in20 mm
Nominal weight
2.470 kg/m1.660 lb/ft1.660 lb/ft2.470 kg/m

Drawing

⌀20 mm⌀0.787 inA = 314 mm²A = 0.487 in²Ribbed bar, side view
Nominal section and side view, all bars drawn at the same scale (the largest bar fills the frame). Ribs schematic; the diameter over the ribs is about 5–15 % larger.Drawn to scale · Dimensions in mmDimensions in inches

Ø20 specifications

dNominal diameter20 mm0.787 in
ANominal area314 mm²0.487 in²
Nominal weight2.470 kg/m1.660 lb/ft

Also known as

T20H20Y20

Nearest bars by area in the other systems

All Rebar Sizes sizes

Compare all 31 sizes in the Rebar Sizes chart →

Sources

  1. ASTM A615/A615M: Deformed and plain carbon-steel bars for concrete reinforcement (Table 1, bar designations)
  2. CRSI: Concrete Reinforcing Steel Institute, ASTM standard reinforcing bars
  3. EN 10080:2005 / ISO 6935-2: Steel for the reinforcement of concrete, nominal sizes and masses
  4. CSA G30.18: Carbon steel bars for concrete reinforcement (metric bar designations)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.