Ø50 Rebar Size, Area and Weight

Rebar Sizes · Metric bars, EN 10080 / ISO 6935-2

Ø50 reinforcing bar (Metric bars, EN 10080 / ISO 6935-2) has a nominal diameter of 50 mm (1.969 in), a nominal cross-section of 1963 mm² (3.043 in²) and weighs 15.400 kg/m (10.348 lb/ft).

dNominal diameter
50 mm1.969 in1.969 in50 mm
Nominal weight
15.400 kg/m10.348 lb/ft10.348 lb/ft15.400 kg/m

Drawing

⌀50 mm⌀1.969 inA = 1963 mm²A = 3.043 in²Ribbed bar, side view
Nominal section and side view, all bars drawn at the same scale (the largest bar fills the frame). Ribs schematic; the diameter over the ribs is about 5–15 % larger.Drawn to scale · Dimensions in mmDimensions in inches

Ø50 specifications

dNominal diameter50 mm1.969 in
ANominal area1963 mm²3.043 in²
Nominal weight15.400 kg/m10.348 lb/ft

Also known as

T50H50Y50

Nearest bars by area in the other systems

All Rebar Sizes sizes

Compare all 31 sizes in the Rebar Sizes chart →

Sources

  1. ASTM A615/A615M: Deformed and plain carbon-steel bars for concrete reinforcement (Table 1, bar designations)
  2. CRSI: Concrete Reinforcing Steel Institute, ASTM standard reinforcing bars
  3. EN 10080:2005 / ISO 6935-2: Steel for the reinforcement of concrete, nominal sizes and masses
  4. CSA G30.18: Carbon steel bars for concrete reinforcement (metric bar designations)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.