DIN 471 – 18 mm Circlip Groove Dimensions

Retaining Rings · DIN 471: external rings for shafts

The DIN 471 – 18 mm ring (DIN 471: external rings for shafts) needs a groove 17 mm (0.669 in) in diameter and at least 1.3 mm (0.0512 in) wide. The ring itself is 1.2 mm (0.0472 in) thick.

d2Groove diameter
17 mm0.669 in0.669 in17 mm
mGroove width (min)
1.3 mm0.0512 in0.0512 in1.3 mm
sRing thickness
1.2 mm0.0472 in0.0472 in1.2 mm

Drawing

⌀18 mm⌀0.709 in
m 1.3 mmm 0.0512 int 0.5 mmt 0.0197 ins 1.2 mms 0.0472 inShaft surfacegroove ⌀17 mmgroove ⌀0.669 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 471 – 18 mm specifications

d1Shaft / bore diameter18 mm0.709 in
d2Groove diameter17 mm0.669 in
mGroove width (min)1.3 mm0.0512 in
sRing thickness1.2 mm0.0472 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.