DIN 471 – 42 mm Circlip Groove Dimensions

Retaining Rings · DIN 471: external rings for shafts

The DIN 471 – 42 mm ring (DIN 471: external rings for shafts) needs a groove 39.5 mm (1.555 in) in diameter and at least 1.85 mm (0.0728 in) wide. The ring itself is 1.75 mm (0.0689 in) thick.

d2Groove diameter
39.5 mm1.555 in1.555 in39.5 mm
mGroove width (min)
1.85 mm0.0728 in0.0728 in1.85 mm
sRing thickness
1.75 mm0.0689 in0.0689 in1.75 mm

Drawing

⌀42 mm⌀1.654 in
m 1.85 mmm 0.0728 int 1.25 mmt 0.0492 ins 1.75 mms 0.0689 inShaft surfacegroove ⌀39.5 mmgroove ⌀1.555 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 471 – 42 mm specifications

d1Shaft / bore diameter42 mm1.654 in
d2Groove diameter39.5 mm1.555 in
mGroove width (min)1.85 mm0.0728 in
sRing thickness1.75 mm0.0689 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.