DIN 471 – 6 mm Circlip Groove Dimensions

Retaining Rings · DIN 471: external rings for shafts

The DIN 471 – 6 mm ring (DIN 471: external rings for shafts) needs a groove 5.7 mm (0.224 in) in diameter and at least 0.8 mm (0.0315 in) wide. The ring itself is 0.7 mm (0.0276 in) thick.

d2Groove diameter
5.7 mm0.224 in0.224 in5.7 mm
mGroove width (min)
0.8 mm0.0315 in0.0315 in0.8 mm
sRing thickness
0.7 mm0.0276 in0.0276 in0.7 mm

Drawing

⌀6 mm⌀0.236 in
m 0.8 mmm 0.0315 int 0.15 mmt 0.0059 ins 0.7 mms 0.0276 inShaft surfacegroove ⌀5.7 mmgroove ⌀0.224 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 471 – 6 mm specifications

d1Shaft / bore diameter6 mm0.236 in
d2Groove diameter5.7 mm0.224 in
mGroove width (min)0.8 mm0.0315 in
sRing thickness0.7 mm0.0276 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.