DIN 471 – 80 mm Circlip Groove Dimensions
Retaining Rings · DIN 471: external rings for shafts
The DIN 471 – 80 mm ring (DIN 471: external rings for shafts) needs a groove 76.5 mm (3.012 in) in diameter and at least 2.65 mm (0.1043 in) wide. The ring itself is 2.5 mm (0.0984 in) thick.
- d2Groove diameter
- 76.5 mm3.012 in3.012 in76.5 mm
- mGroove width (min)
- 2.65 mm0.1043 in0.1043 in2.65 mm
- sRing thickness
- 2.5 mm0.0984 in0.0984 in2.5 mm
Drawing
DIN 471 – 80 mm specifications
| d1Shaft / bore diameter | 80 mm3.150 in |
|---|---|
| d2Groove diameter | 76.5 mm3.012 in |
| mGroove width (min) | 2.65 mm0.1043 in |
| sRing thickness | 2.5 mm0.0984 in |
Same size for the other side (shaft ↔ bore)
All Retaining Rings sizes
Sources
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.