DIN 471 – 85 mm Circlip Groove Dimensions

Retaining Rings · DIN 471: external rings for shafts

The DIN 471 – 85 mm ring (DIN 471: external rings for shafts) needs a groove 81.5 mm (3.209 in) in diameter and at least 3.15 mm (0.1240 in) wide. The ring itself is 3 mm (0.1181 in) thick.

d2Groove diameter
81.5 mm3.209 in3.209 in81.5 mm
mGroove width (min)
3.15 mm0.1240 in0.1240 in3.15 mm
sRing thickness
3 mm0.1181 in0.1181 in3 mm

Drawing

⌀85 mm⌀3.346 in
m 3.15 mmm 0.1240 int 1.75 mmt 0.0689 ins 3 mms 0.1181 inShaft surfacegroove ⌀81.5 mmgroove ⌀3.209 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 471 – 85 mm specifications

d1Shaft / bore diameter85 mm3.346 in
d2Groove diameter81.5 mm3.209 in
mGroove width (min)3.15 mm0.1240 in
sRing thickness3 mm0.1181 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.