DIN 472 – 100 mm Circlip Groove Dimensions
Retaining Rings · DIN 472: internal rings for bores
The DIN 472 – 100 mm ring (DIN 472: internal rings for bores) needs a groove 103.5 mm (4.075 in) in diameter and at least 3.15 mm (0.1240 in) wide. The ring itself is 3 mm (0.1181 in) thick.
- d2Groove diameter
- 103.5 mm4.075 in4.075 in103.5 mm
- mGroove width (min)
- 3.15 mm0.1240 in0.1240 in3.15 mm
- sRing thickness
- 3 mm0.1181 in0.1181 in3 mm
Drawing
DIN 472 – 100 mm specifications
| d1Shaft / bore diameter | 100 mm3.937 in |
|---|---|
| d2Groove diameter | 103.5 mm4.075 in |
| mGroove width (min) | 3.15 mm0.1240 in |
| sRing thickness | 3 mm0.1181 in |
Same size for the other side (shaft ↔ bore)
All Retaining Rings sizes
Sources
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.