DIN 472 – 25 mm Circlip Groove Dimensions

Retaining Rings · DIN 472: internal rings for bores

The DIN 472 – 25 mm ring (DIN 472: internal rings for bores) needs a groove 26.2 mm (1.031 in) in diameter and at least 1.3 mm (0.0512 in) wide. The ring itself is 1.2 mm (0.0472 in) thick.

d2Groove diameter
26.2 mm1.031 in1.031 in26.2 mm
mGroove width (min)
1.3 mm0.0512 in0.0512 in1.3 mm
sRing thickness
1.2 mm0.0472 in0.0472 in1.2 mm

Drawing

⌀25 mm⌀0.984 in
m 1.3 mmm 0.0512 int 0.6 mmt 0.0236 ins 1.2 mms 0.0472 inBore surfacegroove ⌀26.2 mmgroove ⌀1.031 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 472 – 25 mm specifications

d1Shaft / bore diameter25 mm0.984 in
d2Groove diameter26.2 mm1.031 in
mGroove width (min)1.3 mm0.0512 in
sRing thickness1.2 mm0.0472 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.