DIN 472 – 34 mm Circlip Groove Dimensions

Retaining Rings · DIN 472: internal rings for bores

The DIN 472 – 34 mm ring (DIN 472: internal rings for bores) needs a groove 35.7 mm (1.406 in) in diameter and at least 1.6 mm (0.0630 in) wide. The ring itself is 1.5 mm (0.0591 in) thick.

d2Groove diameter
35.7 mm1.406 in1.406 in35.7 mm
mGroove width (min)
1.6 mm0.0630 in0.0630 in1.6 mm
sRing thickness
1.5 mm0.0591 in0.0591 in1.5 mm

Drawing

⌀34 mm⌀1.339 in
m 1.6 mmm 0.0630 int 0.85 mmt 0.0335 ins 1.5 mms 0.0591 inBore surfacegroove ⌀35.7 mmgroove ⌀1.406 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 472 – 34 mm specifications

d1Shaft / bore diameter34 mm1.339 in
d2Groove diameter35.7 mm1.406 in
mGroove width (min)1.6 mm0.0630 in
sRing thickness1.5 mm0.0591 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.