DIN 472 – 45 mm Circlip Groove Dimensions
Retaining Rings · DIN 472: internal rings for bores
The DIN 472 – 45 mm ring (DIN 472: internal rings for bores) needs a groove 47.5 mm (1.870 in) in diameter and at least 1.85 mm (0.0728 in) wide. The ring itself is 1.75 mm (0.0689 in) thick.
- d2Groove diameter
- 47.5 mm1.870 in1.870 in47.5 mm
- mGroove width (min)
- 1.85 mm0.0728 in0.0728 in1.85 mm
- sRing thickness
- 1.75 mm0.0689 in0.0689 in1.75 mm
Drawing
DIN 472 – 45 mm specifications
| d1Shaft / bore diameter | 45 mm1.772 in |
|---|---|
| d2Groove diameter | 47.5 mm1.870 in |
| mGroove width (min) | 1.85 mm0.0728 in |
| sRing thickness | 1.75 mm0.0689 in |
Same size for the other side (shaft ↔ bore)
All Retaining Rings sizes
Sources
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.