DIN 472 – 55 mm Circlip Groove Dimensions

Retaining Rings · DIN 472: internal rings for bores

The DIN 472 – 55 mm ring (DIN 472: internal rings for bores) needs a groove 58 mm (2.283 in) in diameter and at least 2.15 mm (0.0846 in) wide. The ring itself is 2 mm (0.0787 in) thick.

d2Groove diameter
58 mm2.283 in2.283 in58 mm
mGroove width (min)
2.15 mm0.0846 in0.0846 in2.15 mm
sRing thickness
2 mm0.0787 in0.0787 in2 mm

Drawing

⌀55 mm⌀2.165 in
m 2.15 mmm 0.0846 int 1.5 mmt 0.0591 ins 2 mms 0.0787 inBore surfacegroove ⌀58 mmgroove ⌀2.283 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 472 – 55 mm specifications

d1Shaft / bore diameter55 mm2.165 in
d2Groove diameter58 mm2.283 in
mGroove width (min)2.15 mm0.0846 in
sRing thickness2 mm0.0787 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.