DIN 472 – 58 mm Circlip Groove Dimensions
Retaining Rings · DIN 472: internal rings for bores
The DIN 472 – 58 mm ring (DIN 472: internal rings for bores) needs a groove 61 mm (2.402 in) in diameter and at least 2.15 mm (0.0846 in) wide. The ring itself is 2 mm (0.0787 in) thick.
- d2Groove diameter
- 61 mm2.402 in2.402 in61 mm
- mGroove width (min)
- 2.15 mm0.0846 in0.0846 in2.15 mm
- sRing thickness
- 2 mm0.0787 in0.0787 in2 mm
Drawing
DIN 472 – 58 mm specifications
| d1Shaft / bore diameter | 58 mm2.283 in |
|---|---|
| d2Groove diameter | 61 mm2.402 in |
| mGroove width (min) | 2.15 mm0.0846 in |
| sRing thickness | 2 mm0.0787 in |
Same size for the other side (shaft ↔ bore)
All Retaining Rings sizes
Sources
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.