DIN 472 – 72 mm Circlip Groove Dimensions

Retaining Rings · DIN 472: internal rings for bores

The DIN 472 – 72 mm ring (DIN 472: internal rings for bores) needs a groove 75 mm (2.953 in) in diameter and at least 2.65 mm (0.1043 in) wide. The ring itself is 2.5 mm (0.0984 in) thick.

d2Groove diameter
75 mm2.953 in2.953 in75 mm
mGroove width (min)
2.65 mm0.1043 in0.1043 in2.65 mm
sRing thickness
2.5 mm0.0984 in0.0984 in2.5 mm

Drawing

⌀72 mm⌀2.835 in
m 2.65 mmm 0.1043 int 1.5 mmt 0.0591 ins 2.5 mms 0.0984 inBore surfacegroove ⌀75 mmgroove ⌀2.953 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 472 – 72 mm specifications

d1Shaft / bore diameter72 mm2.835 in
d2Groove diameter75 mm2.953 in
mGroove width (min)2.65 mm0.1043 in
sRing thickness2.5 mm0.0984 in

Same size for the other side (shaft ↔ bore)

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.