#41 Roller Chain Dimensions

Roller Chains · ANSI / ASME B29.1 (ISO 606 A series)

#41 roller chain (ANSI / ASME B29.1, ISO 606 A series) has a pitch of 12.7 mm (0.500 in), a roller diameter of 7.77 mm (0.306 in) and an inner width of 6.35 mm (0.250 in) between the inner plates. Pin diameter is 3.58 mm (0.141 in), plate height up to 9.91 mm (0.390 in). Sprockets must match all three: pitch, roller diameter and width.

pPitch
12.7 mm0.500 in0.500 in12.7 mm
d1Roller diameter
7.77 mm0.306 in0.306 in7.77 mm
b1Inner width
6.35 mm0.250 in0.250 in6.35 mm

Drawing

p 12.7 mmp 0.500 inh2 9.91 mmh2 0.390 in⌀7.77 mm⌀0.306 in
b1 6.35 mmb1 0.250 in⌀3.58 mm⌀0.141 inTop view (plate thickness schematic)
Side view: plates in front, rollers hidden (dashed).Drawn to scale · Dimensions in mmDimensions in inches

#41 specifications

pPitch12.7 mm0.500 in
d1Roller diameter7.77 mm0.306 in
b1Inner width6.35 mm0.250 in
d2Pin diameter3.58 mm0.141 in
h2Plate height (max.)9.91 mm0.390 in
ISO 606 code085
ConstructionRoller chain

#41 is the lightweight 1/2 in chain: narrower (1/4 in inner width), with a smaller roller and lower plates than #40. It needs #41 sprockets.

Also known as

41RS4141-1C4141H085

Same pitch in the other standard, not interchangeable

Same pitch in this standard

All roller chains

Compare all 27 chains in the Roller Chains chart →

Sources

  1. ASME B29.1-2011: Precision power transmission roller chains, attachments and sprockets
  2. ISO 606:2015, Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  3. Tsubaki: Drive chain catalogue, ANSI and BS/DIN roller chain dimensions
  4. Renold: Roller chain catalogue, ISO 606 B series

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.