M12×11.8 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M12×11.8 is an AISC M shapes: miscellaneous light beams shape. It is 12 in (304.8 mm) deep with a 3.07 in (78.0 mm) flange, a 0.177 in (4.5 mm) web and an average flange thickness of 0.225 in (5.7 mm), and weighs 11.8 lb/ft (17.6 kg/m). Area 3.47 in² (2,239 mm²); Ix = 72.2 in⁴ (3,005.2 cm⁴), Sx = 12 in³ (196.6 cm³), Zx = 14.3 in³ (234.3 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
78.0 mm3.07 in3.07 in78.0 mm
twWeb thickness
4.5 mm0.177 in0.177 in4.5 mm
tfFlange thickness
5.7 mm0.225 in0.225 in5.7 mm

Drawing

78.0 mm3.07 in304.8 mm12 intf 5.7 mmtf 0.225 intw 4.5 mmtw 0.177 ink 14.3 mmk 0.563 in
Drawn to scale · Dimensions in mmDimensions in inches

M12×11.8 specifications

dDepth12 in304.8 mm
bfFlange width3.07 in78.0 mm
twWeb thickness0.177 in4.5 mm
tfFlange thickness0.225 in5.7 mm
kDesign value0.563 in14.3 mm
kDetailing value9/16 in14.3 mm
k1Detailing value3/8 in9.5 mm
WWeight11.8 lb/ft17.6 kg/m
AArea3.47 in²2,239 mm²
IxMoment of inertia, strong axis72.2 in⁴3,005.2 cm⁴
ZxPlastic modulus, strong axis14.3 in³234.3 cm³
SxSection modulus, strong axis12 in³196.6 cm³
rxRadius of gyration, strong axis4.56 in115.8 mm
IyMoment of inertia, weak axis1.09 in⁴45.4 cm⁴
ZyPlastic modulus, weak axis1.15 in³18.8 cm³
SySection modulus, weak axis0.709 in³11.6 cm³
ryRadius of gyration, weak axis0.56 in14.2 mm
JTorsional constant0.05 in⁴2.08 cm⁴
bf/2tfFlange slenderness6.81
h/twWeb slenderness62.5

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.