S6×12.5 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S6×12.5 is an AISC S shapes: American Standard beams shape. It is 6 in (152.4 mm) deep with a 3.33 in (84.6 mm) flange, a 0.232 in (5.9 mm) web and an average flange thickness of 0.359 in (9.1 mm), and weighs 12.5 lb/ft (18.6 kg/m). Area 3.66 in² (2,361 mm²); Ix = 22 in⁴ (915.7 cm⁴), Sx = 7.34 in³ (120.3 cm³), Zx = 8.45 in³ (138.5 cm³).

dDepth
152.4 mm6 in6 in152.4 mm
bfFlange width
84.6 mm3.33 in3.33 in84.6 mm
twWeb thickness
5.9 mm0.232 in0.232 in5.9 mm
tfFlange thickness
9.1 mm0.359 in0.359 in9.1 mm

Drawing

84.6 mm3.33 in152.4 mm6 intf 9.1 mmtf 0.359 intw 5.9 mmtw 0.232 ink 20.7 mmk 0.813 in
Drawn to scale · Dimensions in mmDimensions in inches

S6×12.5 specifications

dDepth6 in152.4 mm
bfFlange width3.33 in84.6 mm
twWeb thickness0.232 in5.9 mm
tfFlange thickness0.359 in9.1 mm
kDesign value0.813 in20.7 mm
kDetailing value13/16 in20.6 mm
WWeight12.5 lb/ft18.6 kg/m
AArea3.66 in²2,361 mm²
IxMoment of inertia, strong axis22 in⁴915.7 cm⁴
ZxPlastic modulus, strong axis8.45 in³138.5 cm³
SxSection modulus, strong axis7.34 in³120.3 cm³
rxRadius of gyration, strong axis2.45 in62.2 mm
IyMoment of inertia, weak axis1.8 in⁴74.9 cm⁴
ZyPlastic modulus, weak axis1.86 in³30.5 cm³
SySection modulus, weak axis1.08 in³17.7 cm³
ryRadius of gyration, weak axis0.7 in17.8 mm
JTorsional constant0.167 in⁴6.95 cm⁴
bf/2tfFlange slenderness4.64
h/twWeb slenderness19.4
Metric designationS150×18.6

Also known as

S150×18.6

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.