M5×18.9 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M5×18.9 is an AISC M shapes: miscellaneous light beams shape. It is 5 in (127.0 mm) deep with a 5 in (127.0 mm) flange, a 0.316 in (8.0 mm) web and an average flange thickness of 0.416 in (10.6 mm), and weighs 18.9 lb/ft (28.1 kg/m). Area 5.56 in² (3,587 mm²); Ix = 24.2 in⁴ (1,007.3 cm⁴), Sx = 9.67 in³ (158.5 cm³), Zx = 11.1 in³ (181.9 cm³).

dDepth
127.0 mm5 in5 in127.0 mm
bfFlange width
127.0 mm5 in5 in127.0 mm
twWeb thickness
8.0 mm0.316 in0.316 in8.0 mm
tfFlange thickness
10.6 mm0.416 in0.416 in10.6 mm

Drawing

127.0 mm5 in127.0 mm5 intf 10.6 mmtf 0.416 intw 8.0 mmtw 0.316 ink 20.7 mmk 0.813 in
Drawn to scale · Dimensions in mmDimensions in inches

M5×18.9 specifications

dDepth5 in127.0 mm
bfFlange width5 in127.0 mm
twWeb thickness0.316 in8.0 mm
tfFlange thickness0.416 in10.6 mm
kDesign value0.813 in20.7 mm
kDetailing value13/16 in20.6 mm
k1Detailing value1/2 in12.7 mm
WWeight18.9 lb/ft28.1 kg/m
AArea5.56 in²3,587 mm²
IxMoment of inertia, strong axis24.2 in⁴1,007.3 cm⁴
ZxPlastic modulus, strong axis11.1 in³181.9 cm³
SxSection modulus, strong axis9.67 in³158.5 cm³
rxRadius of gyration, strong axis2.08 in52.8 mm
IyMoment of inertia, weak axis8.7 in⁴362.1 cm⁴
ZyPlastic modulus, weak axis5.33 in³87.3 cm³
SySection modulus, weak axis3.48 in³57 cm³
ryRadius of gyration, weak axis1.25 in31.8 mm
JTorsional constant0.313 in⁴13.03 cm⁴
bf/2tfFlange slenderness6.01
h/twWeb slenderness11.2

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.