S8×18.4 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S8×18.4 is an AISC S shapes: American Standard beams shape. It is 8 in (203.2 mm) deep with a 4 in (101.6 mm) flange, a 0.271 in (6.9 mm) web and an average flange thickness of 0.425 in (10.8 mm), and weighs 18.4 lb/ft (27.4 kg/m). Area 5.4 in² (3,484 mm²); Ix = 57.5 in⁴ (2,393.3 cm⁴), Sx = 14.4 in³ (236 cm³), Zx = 16.5 in³ (270.4 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
101.6 mm4 in4 in101.6 mm
twWeb thickness
6.9 mm0.271 in0.271 in6.9 mm
tfFlange thickness
10.8 mm0.425 in0.425 in10.8 mm

Drawing

101.6 mm4 in203.2 mm8 intf 10.8 mmtf 0.425 intw 6.9 mmtw 0.271 ink 25.4 mmk 1 in
Drawn to scale · Dimensions in mmDimensions in inches

S8×18.4 specifications

dDepth8 in203.2 mm
bfFlange width4 in101.6 mm
twWeb thickness0.271 in6.9 mm
tfFlange thickness0.425 in10.8 mm
kDesign value1 in25.4 mm
kDetailing value1 in25.4 mm
WWeight18.4 lb/ft27.4 kg/m
AArea5.4 in²3,484 mm²
IxMoment of inertia, strong axis57.5 in⁴2,393.3 cm⁴
ZxPlastic modulus, strong axis16.5 in³270.4 cm³
SxSection modulus, strong axis14.4 in³236 cm³
rxRadius of gyration, strong axis3.26 in82.8 mm
IyMoment of inertia, weak axis3.69 in⁴153.6 cm⁴
ZyPlastic modulus, weak axis3.18 in³52.1 cm³
SySection modulus, weak axis1.84 in³30.2 cm³
ryRadius of gyration, weak axis0.83 in21.0 mm
JTorsional constant0.335 in⁴13.94 cm⁴
bf/2tfFlange slenderness4.71
h/twWeb slenderness22.9
Metric designationS200×27.4

Also known as

S200×27.4

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.