S10×35 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S10×35 is an AISC S shapes: American Standard beams shape. It is 10 in (254.0 mm) deep with a 4.94 in (125.5 mm) flange, a 0.594 in (15.1 mm) web and an average flange thickness of 0.491 in (12.5 mm), and weighs 35 lb/ft (52.1 kg/m). Area 10.3 in² (6,645 mm²); Ix = 147 in⁴ (6,118.6 cm⁴), Sx = 29.4 in³ (481.8 cm³), Zx = 35.4 in³ (580.1 cm³).

dDepth
254.0 mm10 in10 in254.0 mm
bfFlange width
125.5 mm4.94 in4.94 in125.5 mm
twWeb thickness
15.1 mm0.594 in0.594 in15.1 mm
tfFlange thickness
12.5 mm0.491 in0.491 in12.5 mm

Drawing

125.5 mm4.94 in254.0 mm10 intf 12.5 mmtf 0.491 intw 15.1 mmtw 0.594 ink 28.7 mmk 1.13 in
Drawn to scale · Dimensions in mmDimensions in inches

S10×35 specifications

dDepth10 in254.0 mm
bfFlange width4.94 in125.5 mm
twWeb thickness0.594 in15.1 mm
tfFlange thickness0.491 in12.5 mm
kDesign value1.13 in28.7 mm
kDetailing value1 1/8 in28.6 mm
WWeight35 lb/ft52.1 kg/m
AArea10.3 in²6,645 mm²
IxMoment of inertia, strong axis147 in⁴6,118.6 cm⁴
ZxPlastic modulus, strong axis35.4 in³580.1 cm³
SxSection modulus, strong axis29.4 in³481.8 cm³
rxRadius of gyration, strong axis3.78 in96.0 mm
IyMoment of inertia, weak axis8.3 in⁴345.5 cm⁴
ZyPlastic modulus, weak axis6.19 in³101.4 cm³
SySection modulus, weak axis3.36 in³55.1 cm³
ryRadius of gyration, weak axis0.9 in22.8 mm
JTorsional constant1.29 in⁴53.69 cm⁴
bf/2tfFlange slenderness5.03
h/twWeb slenderness13.4
Metric designationS250×52

Also known as

S250×52

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.