S12×35 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S12×35 is an AISC S shapes: American Standard beams shape. It is 12 in (304.8 mm) deep with a 5.08 in (129.0 mm) flange, a 0.428 in (10.9 mm) web and an average flange thickness of 0.544 in (13.8 mm), and weighs 35 lb/ft (52.1 kg/m). Area 10.2 in² (6,581 mm²); Ix = 228 in⁴ (9,490.1 cm⁴), Sx = 38.1 in³ (624.3 cm³), Zx = 44.6 in³ (730.9 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
129.0 mm5.08 in5.08 in129.0 mm
twWeb thickness
10.9 mm0.428 in0.428 in10.9 mm
tfFlange thickness
13.8 mm0.544 in0.544 in13.8 mm

Drawing

129.0 mm5.08 in304.8 mm12 intf 13.8 mmtf 0.544 intw 10.9 mmtw 0.428 ink 30.2 mmk 1.19 in
Drawn to scale · Dimensions in mmDimensions in inches

S12×35 specifications

dDepth12 in304.8 mm
bfFlange width5.08 in129.0 mm
twWeb thickness0.428 in10.9 mm
tfFlange thickness0.544 in13.8 mm
kDesign value1.19 in30.2 mm
kDetailing value1 3/16 in30.2 mm
WWeight35 lb/ft52.1 kg/m
AArea10.2 in²6,581 mm²
IxMoment of inertia, strong axis228 in⁴9,490.1 cm⁴
ZxPlastic modulus, strong axis44.6 in³730.9 cm³
SxSection modulus, strong axis38.1 in³624.3 cm³
rxRadius of gyration, strong axis4.72 in119.9 mm
IyMoment of inertia, weak axis9.84 in⁴409.6 cm⁴
ZyPlastic modulus, weak axis6.8 in³111.4 cm³
SySection modulus, weak axis3.88 in³63.6 cm³
ryRadius of gyration, weak axis0.98 in24.9 mm
JTorsional constant1.05 in⁴43.7 cm⁴
bf/2tfFlange slenderness4.67
h/twWeb slenderness23.1
Metric designationS310×52

Also known as

S310×52

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.