S15×42.9 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S15×42.9 is an AISC S shapes: American Standard beams shape. It is 15 in (381.0 mm) deep with a 5.5 in (139.7 mm) flange, a 0.411 in (10.4 mm) web and an average flange thickness of 0.622 in (15.8 mm), and weighs 42.9 lb/ft (63.8 kg/m). Area 12.6 in² (8,129 mm²); Ix = 446 in⁴ (18,563.9 cm⁴), Sx = 59.4 in³ (973.4 cm³), Zx = 69.2 in³ (1134 cm³).

dDepth
381.0 mm15 in15 in381.0 mm
bfFlange width
139.7 mm5.5 in5.5 in139.7 mm
twWeb thickness
10.4 mm0.411 in0.411 in10.4 mm
tfFlange thickness
15.8 mm0.622 in0.622 in15.8 mm

Drawing

139.7 mm5.5 in381.0 mm15 intf 15.8 mmtf 0.622 intw 10.4 mmtw 0.411 ink 35.1 mmk 1.38 in
Drawn to scale · Dimensions in mmDimensions in inches

S15×42.9 specifications

dDepth15 in381.0 mm
bfFlange width5.5 in139.7 mm
twWeb thickness0.411 in10.4 mm
tfFlange thickness0.622 in15.8 mm
kDesign value1.38 in35.1 mm
kDetailing value1 3/8 in34.9 mm
WWeight42.9 lb/ft63.8 kg/m
AArea12.6 in²8,129 mm²
IxMoment of inertia, strong axis446 in⁴18,563.9 cm⁴
ZxPlastic modulus, strong axis69.2 in³1134 cm³
SxSection modulus, strong axis59.4 in³973.4 cm³
rxRadius of gyration, strong axis5.95 in151.1 mm
IyMoment of inertia, weak axis14.3 in⁴595.2 cm⁴
ZyPlastic modulus, weak axis9.08 in³148.8 cm³
SySection modulus, weak axis5.19 in³85 cm³
ryRadius of gyration, weak axis1.06 in26.9 mm
JTorsional constant1.54 in⁴64.1 cm⁴
bf/2tfFlange slenderness4.42
h/twWeb slenderness30.4
Metric designationS380×64

Also known as

S380×64

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.