S15×50 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S15×50 is an AISC S shapes: American Standard beams shape. It is 15 in (381.0 mm) deep with a 5.64 in (143.3 mm) flange, a 0.55 in (14.0 mm) web and an average flange thickness of 0.622 in (15.8 mm), and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); Ix = 485 in⁴ (20,187.2 cm⁴), Sx = 64.7 in³ (1060.2 cm³), Zx = 77 in³ (1261.8 cm³).

dDepth
381.0 mm15 in15 in381.0 mm
bfFlange width
143.3 mm5.64 in5.64 in143.3 mm
twWeb thickness
14.0 mm0.55 in0.55 in14.0 mm
tfFlange thickness
15.8 mm0.622 in0.622 in15.8 mm

Drawing

143.3 mm5.64 in381.0 mm15 intf 15.8 mmtf 0.622 intw 14.0 mmtw 0.55 ink 35.1 mmk 1.38 in
Drawn to scale · Dimensions in mmDimensions in inches

S15×50 specifications

dDepth15 in381.0 mm
bfFlange width5.64 in143.3 mm
twWeb thickness0.55 in14.0 mm
tfFlange thickness0.622 in15.8 mm
kDesign value1.38 in35.1 mm
kDetailing value1 3/8 in34.9 mm
WWeight50 lb/ft74.4 kg/m
AArea14.7 in²9,484 mm²
IxMoment of inertia, strong axis485 in⁴20,187.2 cm⁴
ZxPlastic modulus, strong axis77 in³1261.8 cm³
SxSection modulus, strong axis64.7 in³1060.2 cm³
rxRadius of gyration, strong axis5.75 in146.0 mm
IyMoment of inertia, weak axis15.6 in⁴649.3 cm⁴
ZyPlastic modulus, weak axis10 in³163.9 cm³
SySection modulus, weak axis5.53 in³90.6 cm³
ryRadius of gyration, weak axis1.03 in26.2 mm
JTorsional constant2.12 in⁴88.24 cm⁴
bf/2tfFlange slenderness4.53
h/twWeb slenderness22.7
Metric designationS380×74

Also known as

S380×74

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.