S20×75 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S20×75 is an AISC S shapes: American Standard beams shape. It is 20 in (508.0 mm) deep with a 6.39 in (162.3 mm) flange, a 0.635 in (16.1 mm) web and an average flange thickness of 0.795 in (20.2 mm), and weighs 75 lb/ft (111.6 kg/m). Area 22 in² (14,194 mm²); Ix = 1,280 in⁴ (53,277.6 cm⁴), Sx = 128 in³ (2097.5 cm³), Zx = 152 in³ (2490.8 cm³).

dDepth
508.0 mm20 in20 in508.0 mm
bfFlange width
162.3 mm6.39 in6.39 in162.3 mm
twWeb thickness
16.1 mm0.635 in0.635 in16.1 mm
tfFlange thickness
20.2 mm0.795 in0.795 in20.2 mm

Drawing

162.3 mm6.39 in508.0 mm20 intf 20.2 mmtf 0.795 intw 16.1 mmtw 0.635 ink 41.4 mmk 1.63 in
Drawn to scale · Dimensions in mmDimensions in inches

S20×75 specifications

dDepth20 in508.0 mm
bfFlange width6.39 in162.3 mm
twWeb thickness0.635 in16.1 mm
tfFlange thickness0.795 in20.2 mm
kDesign value1.63 in41.4 mm
kDetailing value1 5/8 in41.3 mm
WWeight75 lb/ft111.6 kg/m
AArea22 in²14,194 mm²
IxMoment of inertia, strong axis1,280 in⁴53,277.6 cm⁴
ZxPlastic modulus, strong axis152 in³2490.8 cm³
SxSection modulus, strong axis128 in³2097.5 cm³
rxRadius of gyration, strong axis7.62 in193.5 mm
IyMoment of inertia, weak axis29.5 in⁴1227.9 cm⁴
ZyPlastic modulus, weak axis16.7 in³273.7 cm³
SySection modulus, weak axis9.25 in³151.6 cm³
ryRadius of gyration, weak axis1.16 in29.5 mm
JTorsional constant4.59 in⁴191.05 cm⁴
bf/2tfFlange slenderness4.02
h/twWeb slenderness26.6
Metric designationS510×112

Also known as

S510×112

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.