S18×70 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S18×70 is an AISC S shapes: American Standard beams shape. It is 18 in (457.2 mm) deep with a 6.25 in (158.8 mm) flange, a 0.711 in (18.1 mm) web and an average flange thickness of 0.691 in (17.6 mm), and weighs 70 lb/ft (104.2 kg/m). Area 20.5 in² (13,226 mm²); Ix = 923 in⁴ (38,418.2 cm⁴), Sx = 103 in³ (1687.9 cm³), Zx = 124 in³ (2032 cm³).

dDepth
457.2 mm18 in18 in457.2 mm
bfFlange width
158.8 mm6.25 in6.25 in158.8 mm
twWeb thickness
18.1 mm0.711 in0.711 in18.1 mm
tfFlange thickness
17.6 mm0.691 in0.691 in17.6 mm

Drawing

158.8 mm6.25 in457.2 mm18 intf 17.6 mmtf 0.691 intw 18.1 mmtw 0.711 ink 38.1 mmk 1.5 in
Drawn to scale · Dimensions in mmDimensions in inches

S18×70 specifications

dDepth18 in457.2 mm
bfFlange width6.25 in158.8 mm
twWeb thickness0.711 in18.1 mm
tfFlange thickness0.691 in17.6 mm
kDesign value1.5 in38.1 mm
kDetailing value1 1/2 in38.1 mm
WWeight70 lb/ft104.2 kg/m
AArea20.5 in²13,226 mm²
IxMoment of inertia, strong axis923 in⁴38,418.2 cm⁴
ZxPlastic modulus, strong axis124 in³2032 cm³
SxSection modulus, strong axis103 in³1687.9 cm³
rxRadius of gyration, strong axis6.7 in170.2 mm
IyMoment of inertia, weak axis24 in⁴999 cm⁴
ZyPlastic modulus, weak axis14.3 in³234.3 cm³
SySection modulus, weak axis7.69 in³126 cm³
ryRadius of gyration, weak axis1.08 in27.4 mm
JTorsional constant4.1 in⁴170.65 cm⁴
bf/2tfFlange slenderness4.52
h/twWeb slenderness21.5
Metric designationS460×104

Also known as

S460×104

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.