S20×86 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S20×86 is an AISC S shapes: American Standard beams shape. It is 20.3 in (515.6 mm) deep with a 7.06 in (179.3 mm) flange, a 0.66 in (16.8 mm) web and an average flange thickness of 0.92 in (23.4 mm), and weighs 86 lb/ft (128.0 kg/m). Area 25.3 in² (16,323 mm²); Ix = 1,570 in⁴ (65,348.3 cm⁴), Sx = 155 in³ (2540 cm³), Zx = 183 in³ (2998.8 cm³).

dDepth
515.6 mm20.3 in20.3 in515.6 mm
bfFlange width
179.3 mm7.06 in7.06 in179.3 mm
twWeb thickness
16.8 mm0.66 in0.66 in16.8 mm
tfFlange thickness
23.4 mm0.92 in0.92 in23.4 mm

Drawing

179.3 mm7.06 in515.6 mm20.3 intf 23.4 mmtf 0.92 intw 16.8 mmtw 0.66 ink 44.4 mmk 1.75 in
Drawn to scale · Dimensions in mmDimensions in inches

S20×86 specifications

dDepth20.3 in515.6 mm
bfFlange width7.06 in179.3 mm
twWeb thickness0.66 in16.8 mm
tfFlange thickness0.92 in23.4 mm
kDesign value1.75 in44.4 mm
kDetailing value1 3/4 in44.4 mm
WWeight86 lb/ft128.0 kg/m
AArea25.3 in²16,323 mm²
IxMoment of inertia, strong axis1,570 in⁴65,348.3 cm⁴
ZxPlastic modulus, strong axis183 in³2998.8 cm³
SxSection modulus, strong axis155 in³2540 cm³
rxRadius of gyration, strong axis7.89 in200.4 mm
IyMoment of inertia, weak axis46.6 in⁴1939.6 cm⁴
ZyPlastic modulus, weak axis23.1 in³378.5 cm³
SySection modulus, weak axis13.2 in³216.3 cm³
ryRadius of gyration, weak axis1.36 in34.5 mm
JTorsional constant6.65 in⁴276.79 cm⁴
bf/2tfFlange slenderness3.84
h/twWeb slenderness25.6
Metric designationS510×128

Also known as

S510×128

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.