S24×90 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S24×90 is an AISC S shapes: American Standard beams shape. It is 24 in (609.6 mm) deep with a 7.13 in (181.1 mm) flange, a 0.625 in (15.9 mm) web and an average flange thickness of 0.87 in (22.1 mm), and weighs 90 lb/ft (133.9 kg/m). Area 26.5 in² (17,097 mm²); Ix = 2,250 in⁴ (93,652.1 cm⁴), Sx = 187 in³ (3064.4 cm³), Zx = 222 in³ (3637.9 cm³).

dDepth
609.6 mm24 in24 in609.6 mm
bfFlange width
181.1 mm7.13 in7.13 in181.1 mm
twWeb thickness
15.9 mm0.625 in0.625 in15.9 mm
tfFlange thickness
22.1 mm0.87 in0.87 in22.1 mm

Drawing

181.1 mm7.13 in609.6 mm24 intf 22.1 mmtf 0.87 intw 15.9 mmtw 0.625 ink 44.4 mmk 1.75 in
Drawn to scale · Dimensions in mmDimensions in inches

S24×90 specifications

dDepth24 in609.6 mm
bfFlange width7.13 in181.1 mm
twWeb thickness0.625 in15.9 mm
tfFlange thickness0.87 in22.1 mm
kDesign value1.75 in44.4 mm
kDetailing value1 3/4 in44.4 mm
WWeight90 lb/ft133.9 kg/m
AArea26.5 in²17,097 mm²
IxMoment of inertia, strong axis2,250 in⁴93,652.1 cm⁴
ZxPlastic modulus, strong axis222 in³3637.9 cm³
SxSection modulus, strong axis187 in³3064.4 cm³
rxRadius of gyration, strong axis9.21 in233.9 mm
IyMoment of inertia, weak axis44.7 in⁴1860.6 cm⁴
ZyPlastic modulus, weak axis22.4 in³367.1 cm³
SySection modulus, weak axis12.5 in³204.8 cm³
ryRadius of gyration, weak axis1.3 in33.0 mm
JTorsional constant6.05 in⁴251.82 cm⁴
bf/2tfFlange slenderness4.09
h/twWeb slenderness33.1
Metric designationS610×134

Also known as

S610×134

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.