S24×121 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S24×121 is an AISC S shapes: American Standard beams shape. It is 24.5 in (622.3 mm) deep with a 8.05 in (204.5 mm) flange, a 0.8 in (20.3 mm) web and an average flange thickness of 1.09 in (27.7 mm), and weighs 121 lb/ft (180.1 kg/m). Area 35.5 in² (22,903 mm²); Ix = 3,160 in⁴ (131,529.1 cm⁴), Sx = 258 in³ (4227.9 cm³), Zx = 306 in³ (5014.4 cm³).

dDepth
622.3 mm24.5 in24.5 in622.3 mm
bfFlange width
204.5 mm8.05 in8.05 in204.5 mm
twWeb thickness
20.3 mm0.8 in0.8 in20.3 mm
tfFlange thickness
27.7 mm1.09 in1.09 in27.7 mm

Drawing

204.5 mm8.05 in622.3 mm24.5 intf 27.7 mmtf 1.09 intw 20.3 mmtw 0.8 ink 50.8 mmk 2 in
Drawn to scale · Dimensions in mmDimensions in inches

S24×121 specifications

dDepth24.5 in622.3 mm
bfFlange width8.05 in204.5 mm
twWeb thickness0.8 in20.3 mm
tfFlange thickness1.09 in27.7 mm
kDesign value2 in50.8 mm
kDetailing value2 in50.8 mm
WWeight121 lb/ft180.1 kg/m
AArea35.5 in²22,903 mm²
IxMoment of inertia, strong axis3,160 in⁴131,529.1 cm⁴
ZxPlastic modulus, strong axis306 in³5014.4 cm³
SxSection modulus, strong axis258 in³4227.9 cm³
rxRadius of gyration, strong axis9.43 in239.5 mm
IyMoment of inertia, weak axis83 in⁴3454.7 cm⁴
ZyPlastic modulus, weak axis36.3 in³594.9 cm³
SySection modulus, weak axis20.6 in³337.6 cm³
ryRadius of gyration, weak axis1.53 in38.9 mm
JTorsional constant12.8 in⁴532.78 cm⁴
bf/2tfFlange slenderness3.69
h/twWeb slenderness25.9
Metric designationS610×180

Also known as

S610×180

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.