S24×106 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S24×106 is an AISC S shapes: American Standard beams shape. It is 24.5 in (622.3 mm) deep with a 7.87 in (199.9 mm) flange, a 0.62 in (15.7 mm) web and an average flange thickness of 1.09 in (27.7 mm), and weighs 106 lb/ft (157.7 kg/m). Area 31.1 in² (20,064 mm²); Ix = 2,940 in⁴ (122,372 cm⁴), Sx = 240 in³ (3932.9 cm³), Zx = 279 in³ (4572 cm³).

dDepth
622.3 mm24.5 in24.5 in622.3 mm
bfFlange width
199.9 mm7.87 in7.87 in199.9 mm
twWeb thickness
15.7 mm0.62 in0.62 in15.7 mm
tfFlange thickness
27.7 mm1.09 in1.09 in27.7 mm

Drawing

199.9 mm7.87 in622.3 mm24.5 intf 27.7 mmtf 1.09 intw 15.7 mmtw 0.62 ink 50.8 mmk 2 in
Drawn to scale · Dimensions in mmDimensions in inches

S24×106 specifications

dDepth24.5 in622.3 mm
bfFlange width7.87 in199.9 mm
twWeb thickness0.62 in15.7 mm
tfFlange thickness1.09 in27.7 mm
kDesign value2 in50.8 mm
kDetailing value2 in50.8 mm
WWeight106 lb/ft157.7 kg/m
AArea31.1 in²20,064 mm²
IxMoment of inertia, strong axis2,940 in⁴122,372 cm⁴
ZxPlastic modulus, strong axis279 in³4572 cm³
SxSection modulus, strong axis240 in³3932.9 cm³
rxRadius of gyration, strong axis9.71 in246.6 mm
IyMoment of inertia, weak axis76.8 in⁴3196.7 cm⁴
ZyPlastic modulus, weak axis33.4 in³547.3 cm³
SySection modulus, weak axis19.5 in³319.5 cm³
ryRadius of gyration, weak axis1.57 in39.9 mm
JTorsional constant10.1 in⁴420.39 cm⁴
bf/2tfFlange slenderness3.61
h/twWeb slenderness33.4
Metric designationS610×158

Also known as

S610×158

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.