ST4.2 Self-Tapping Screw Dimensions

Self-Tapping Screws

An ST4.2 self-tapping screw has a thread of 4.22 mm (0.166 in) maximum diameter and 1.4 mm (0.055 in) pitch (ISO 1478), equivalent to a #8 sheet metal screw. The pan head to ISO 7049 is up to 8.0 mm (0.315 in) across and 3.1 mm (0.122 in) high, with a PH2 / PZ2 recess.

dMajor diameter
4.22 mm0.166 in0.166 in4.22 mm
PPitch
1.4 mm0.055 in0.055 in1.4 mm
Inch gauge equivalent
#8
dkPan head dia. ISO 7049 (max)
8.0 mm0.315 in0.315 in8.0 mm

Drawing

⌀8.0 mm⌀0.315 in⌀4.22 mm⌀0.166 inP 1.4 mmP 0.055 in
PH2
ISO 7049 pan head, point type C; thread profile drawn to pitchDrawn to scale · Dimensions in mmDimensions in inches

ST4.2 specifications

dMajor diameter4.22 mm0.166 in
PPitch1.4 mm0.055 in
nThreads per inch (approx.)18.1
Inch gauge equivalent#8
dkPan head dia. ISO 7049 (max)8.0 mm0.315 in
kPan head height ISO 7049 (max)3.1 mm0.122 in
Cross recessPH2 / PZ2

ST4.2 = #8 sheet metal screw: 4.22 mm, 1.4 mm pitch (18 TPI). The most common size for ducting and sheet metal brackets.

Also known as

ST4.2x

All Self-Tapping Screws sizes

Compare all 8 sizes in the Self-Tapping Screws chart →

Sources

  1. ISO 1478:1999, Tapping screws thread
  2. ISO 7049:2011, Cross recessed pan head tapping screws
  3. fasten.it: DIN EN ISO 15481 drilling screws (pan head, tapping thread) table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.