10 gauge Sheet Metal Thickness
Sheet Metal Gauge
10 gauge sheet is 0.1345 in (3.42 mm) thick in standard (uncoated) steel and 0.1019 in (2.59 mm) in aluminum. Stainless steel of the same gauge is 0.1406 in (3.57 mm).
- tStandard steel (MSG)
- 3.42 mm0.1345 in0.1345 in3.42 mm
- tGalvanized steel
- 3.51 mm0.1382 in0.1382 in3.51 mm
- tStainless steel
- 3.57 mm0.1406 in0.1406 in3.57 mm
- tAluminum (B&S / AWG)
- 2.59 mm0.1019 in0.1019 in2.59 mm
Drawing
10 gauge specifications
| tStandard steel (MSG) | 0.1345 in3.42 mm |
|---|---|
| tGalvanized steel | 0.1382 in3.51 mm |
| tStainless steel | 0.1406 in3.57 mm |
| tAluminum (B&S / AWG) | 0.1019 in2.59 mm |
10 gauge steel is 0.1345 in (3.42 mm), just over 1/8 in; aluminum 10 ga is 0.1019 in (2.59 mm).
All Sheet Metal Gauge sizes
Sources
- ASTM A480 / A240 (stainless sheet) and ASTM A653 (galvanized): ordering by decimal thickness; gauge tables as published by distributors
- Engineers Edge: Sheet metal gauge sizes table (standard steel, galvanized, stainless, aluminum)
- ASTM B258: Standard nominal diameters of solid round wires (AWG / Brown & Sharpe formula)
- U.S. Standard Gauge for sheet and plate iron and steel, Act of Congress of March 3, 1893 (15 U.S.C. 206)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.