14 gauge Sheet Metal Thickness

Sheet Metal Gauge

14 gauge sheet is 0.0747 in (1.90 mm) thick in standard (uncoated) steel and 0.0641 in (1.63 mm) in aluminum. Stainless steel of the same gauge is 0.0781 in (1.98 mm).

tStandard steel (MSG)
1.90 mm0.0747 in0.0747 in1.90 mm
tGalvanized steel
1.99 mm0.0785 in0.0785 in1.99 mm
tStainless steel
1.98 mm0.0781 in0.0781 in1.98 mm
tAluminum (B&S / AWG)
1.63 mm0.0641 in0.0641 in1.63 mm

Drawing

Steel1.90 mm0.0747 inGalvanized1.99 mm0.0785 inStainless1.98 mm0.0781 inAluminum1.63 mm0.0641 in
Sheet edges at one enlarged scale (the same for every gauge page).Drawn to scale · Dimensions in mmDimensions in inches

14 gauge specifications

tStandard steel (MSG)0.0747 in1.90 mm
tGalvanized steel0.0785 in1.99 mm
tStainless steel0.0781 in1.98 mm
tAluminum (B&S / AWG)0.0641 in1.63 mm

14 gauge steel is 0.0747 in (1.90 mm, 3.125 lb/ft²), a common thickness for brackets and enclosures.

All Sheet Metal Gauge sizes

Compare all 28 sizes in the Sheet Metal Gauge chart →

Sources

  1. ASTM A480 / A240 (stainless sheet) and ASTM A653 (galvanized): ordering by decimal thickness; gauge tables as published by distributors
  2. Engineers Edge: Sheet metal gauge sizes table (standard steel, galvanized, stainless, aluminum)
  3. ASTM B258: Standard nominal diameters of solid round wires (AWG / Brown & Sharpe formula)
  4. U.S. Standard Gauge for sheet and plate iron and steel, Act of Congress of March 3, 1893 (15 U.S.C. 206)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.