3 gauge Sheet Metal Thickness

Sheet Metal Gauge

3 gauge sheet is 0.2391 in (6.07 mm) thick in standard (uncoated) steel and 0.2294 in (5.83 mm) in aluminum. Stainless steel of the same gauge is 0.2500 in (6.35 mm).

tStandard steel (MSG)
6.07 mm0.2391 in0.2391 in6.07 mm
tStainless steel
6.35 mm0.2500 in0.2500 in6.35 mm
tAluminum (B&S / AWG)
5.83 mm0.2294 in0.2294 in5.83 mm

Drawing

Steel6.07 mm0.2391 inStainless6.35 mm0.2500 inAluminum5.83 mm0.2294 in
Sheet edges at one enlarged scale (the same for every gauge page).Drawn to scale · Dimensions in mmDimensions in inches

3 gauge specifications

tStandard steel (MSG)0.2391 in6.07 mm
tStainless steel0.2500 in6.35 mm
tAluminum (B&S / AWG)0.2294 in5.83 mm

Gauges below 7 are rarely used for sheet; material this thick is usually ordered as plate by decimal or fractional thickness.

All Sheet Metal Gauge sizes

Compare all 28 sizes in the Sheet Metal Gauge chart →

Sources

  1. ASTM A480 / A240 (stainless sheet) and ASTM A653 (galvanized): ordering by decimal thickness; gauge tables as published by distributors
  2. Engineers Edge: Sheet metal gauge sizes table (standard steel, galvanized, stainless, aluminum)
  3. ASTM B258: Standard nominal diameters of solid round wires (AWG / Brown & Sharpe formula)
  4. U.S. Standard Gauge for sheet and plate iron and steel, Act of Congress of March 3, 1893 (15 U.S.C. 206)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.