SOD-123 Package Dimensions
SMD & IC Packages · Diodes and small transistors
The SOD-123 package body is 2.7 mm (0.106 in) long and 1.6 mm (0.063 in) wide. See the drawing for the overall size over the leads and the pin pitch; the land pattern for your PCB comes from the part's datasheet.
- LBody length
- 2.7 mm0.106 in0.106 in2.7 mm
- WBody width
- 1.6 mm0.063 in0.063 in1.6 mm
- Pins
- 2
Drawing
SOD-123 specifications
| LBody length | 2.7 mm0.106 in |
|---|---|
| WBody width | 1.6 mm0.063 in |
| EWidth over leads | 3.7 mm0.146 in |
| HHeight (max.; chips: typ.) | 1.35 mm0.053 in |
| Pins | 2 |
| Standard | JEDEC SOD-123 |
A common package for small signal diodes, Zeners and Schottky diodes (for example 1N4148W, MBR0520). The band on the body marks the cathode.
All packages
Sources
- JEDEC JEP95: JEDEC Registered and Standard Outlines for Semiconductor Devices
- IEC 60115-8 / EIA-576: Fixed chip resistors, case sizes
- Yageo: RC series general purpose chip resistors datasheet
- Vishay: CRCW thick film chip resistors datasheet
- Texas Instruments: Package outline drawings (DBV, DCK, D, PW, DGK, RGT, PM)
- Nexperia: Package information (SOT23, SOT323, SOT363, SOD123, SOD323, SOT89, SOT223)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.