AFL Oval Dimensions
Sports Fields · Soccer, Gaelic and Australian football
AFL Oval: 135–185 m (443–607 ft) long and 110–155 m (361–509 ft) wide, with a goal 6.4 m (21 ft) wide. The plan below is drawn to scale, and the table lists every marking you need to line it.
- LLength (field of play)
- 135–185 m443–607 ft443–607 ft135–185 m
- WWidth
- 110–155 m361–509 ft361–509 ft110–155 m
- Goal width (inside posts)
- 6.4 m21 ft21 ft6.4 m
Drawing
AFL Oval specifications
| LLength (field of play) | 135–185 m443–607 ft |
|---|---|
| WWidth | 110–155 m361–509 ft |
| Goal width (inside posts) | 6.4 m21 ft |
Markings: AFL Oval
| Marking | Size |
|---|---|
| Shape | oval; no fixed size, grounds range from long and narrow to almost round |
| Centre square | 50 m × 50 m |
| Goal square | 6.4 m wide × 9 m deep |
| 50 m arcs | radius 50 m from the centre of each goal line |
| Posts | goal posts 6.4 m apart; behind posts 6.4 m outside each goal post |
No two major AFL grounds are the same size. Most top-level grounds are roughly 155–175 m long and 125–145 m wide; the drawing uses 165 × 135 m.
All Sports Fields sizes
Sources
- IFAB: Laws of the Game, Law 1: The Field of Play
- NFL: Official Playing Rules, Rule 1: The Field
- NCAA: Football Rules and Interpretations, Rule 1
- NFHS: Football Rules Book, Rule 1 (field diagram)
- CFL: rule and field changes announced 22 Sept 2025 (effective 2027)
- World Rugby: Laws of the Game, Law 1: The Ground
- RFL: Match Day Operations 2026 (pitch dimensions); International Rugby League Laws of the Game
- AFL: Measure out and line mark an Australian Rules oval
- MCC: Laws of Cricket, Laws 6 and 7; ICC playing conditions, clause 19 (boundaries)
- MLB: Official Baseball Rules, Rule 2.01 and field diagrams
- FIH: Rules of Hockey, Playing Area
- USA Lacrosse: How to line a men's field (2026)
- Government of Western Australia: Sports Dimensions Guide (cross-check for rugby, AFL, Gaelic, hockey, lacrosse, softball)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.